





Fabric Description:
-
Outer Shell - Bear Wear Hydro Tech Royal Blue/Grey/Red with HD treatment, filmed on back
-
Modacrylic/Cellulose/Polyarylate/Polyamide/As
-
Inner layer - 12oz black fleece
-
100%Cotton
​
Garment Construction:
-
Aramid high tenacity FR thread
-
All metal thermally protected from the skin
-
Bar-tacked at all stress points
-
Protective stand-up collar with 1 set velcro closure
-
Two-way heavy duty #5 brass zipper on aramid tape,
double stitching on the zipper tape -
Storm guard over zipper with 5 sets velcro closure
-
Action back for mobility
-
D-Ring Access with Velcro closure
-
Seam sealed
​
Pockets:
-
2 chest patch pockets, flap with 2 sets velcro closure each
-
FR cotton mesh over left pocket
-
2 waist patch pockets, flap with 2 sets velcro closure each
-
Pen pocket on left sleeve
-
1 inside chest patch pocket on the left with 1 set velcro closure
​
High Visibility Trim:
-
2” RT80 H7440 Reflective Tape, YSY
-
Double stitching on tape
-
Reflective tape around arm and waist, vertical at front,
"X" striping on back
PPE Standards Met:
Protective flame retardant and arc flash suits described in this technical standard are used in noxious and hazardous environments must meet the following safety and visibility standards:
-
CAT 4
-
ATPV 54 cal/cm2 (electric arc flash rating)
-
US Standards: NFPA 2112-2023 (Only flame resistance tested by SGS)
-
ASTM F1868-17 Thermal Resistance CLO - 0.54
-
AATCC TM127 Water Resistance (Hydrostatic Head) -3000mm H2O
-
AATCC TM35 Water Resistance(Rain Test) - 900mm head pressure, 2 minutes impact
-
ASTM E96 Water Vapour Transmission - 5000g/24h/m2​